Diamond Drill
Blog · Drilling and geotechnics

SPT Drilling Rig for Sale: How to Choose a Geotechnical Rig

Buying a geotechnical drill rig is a multi-year decision. The right SPT rig keeps your crews busy and your data consistent; the wrong one sits idle because it cannot reach the depth, cannot be moved to the site or cannot get spare parts. This guide lists what to define before you ask suppliers for a quote, and how the Diamond Drill CD range fits each case.

Start with the work, not the machine

  1. Depth. The deepest SPT and the deepest core you expect to run in the next three years.

  2. Ground. Soil only, or soil that turns into weathered rock and rock where the SPT reaches refusal.

  3. Access. Narrow gates, soft ground, steep slopes or urban sites that limit rig size and weight.

  4. Standards. ASTM D1586, ISO 22476-3 or a national standard such as the Brazilian NBR 6484, which your clients will ask you to follow.

  5. Crew. How many people you can put on each rig, and how much of the SPT you want to leave to the machine.

The Diamond Drill CD range at a glance

The CD 100, CD 200 and CD 400 are mixed rigs: an automatic drop-hammer SPT system plus a rotary system for core sampling, so the same machine can continue when the SPT reaches refusal. Values below are the recommended and maximum capacities from the manufacturer data; capacity always depends on ground conditions, tooling and correct operation.

CD 100CD 200CD 400
Auto Drop Hammer SPT40 to 50 m50 to 55 m60 to 65 m
Rotary, A diameter100 to 150 m200 to 250 m300 to 350 m
Rotary, N diameter60 to 70 m100 to 150 m200 to 250 m
Rotary, H diameter40 to 60 m80 to 100 m150 to 200 m
Engine39 hp dieselSee data sheet89 hp diesel
Weight1,900 kgSee data sheet2,300 kg

All three run on self-propelled rubber tracks with hydraulic levelling, a hydraulic winch and a hydraulic vise and tool extractor, and can be transported on trailers, vans or small trucks. See the full data on the CD 100, CD 200 and CD 400 pages.

Seven criteria to compare suppliers

1. Real depth capacity

Ask for the recommended depth, not only the maximum. A rig that reaches its maximum only under ideal conditions will not give you a reliable daily schedule.

2. How the SPT is driven

A manual rope-and-cathead hammer gives a different energy from one operator to the next, which is why N-values vary between crews. An automatic drop hammer repeats the same drop height every blow, needs fewer people and keeps the operator away from ropes and pulleys. Read automatic or manual SPT hammer: why N-values differ and SPT energy, N60 and hammer efficiency before you decide.

3. Hammer settings and standards

Check that hammer mass and drop height can be adjusted to the standard you work with. The CD range lets the SPT settings follow the project requirements. The differences between the standards are summarised in ASTM D1586 vs ISO 22476-3.

4. What happens at refusal

In weathered rock or cemented layers the SPT stops. With a mixed rig you switch to rotary coring in the same hole and keep going, instead of demobilising and calling a second rig. Compare the rotary diameters and depths you actually need, and see core sizes BQ, NQ, HQ and PQ.

5. Transport and access

Measure the smallest gate and the heaviest ramp on your typical jobs. Weight, width and minimum height decide where the rig can work, and whether it travels on a trailer or needs a truck.

6. Crew and training

A rig that needs one operator and one assistant changes your payroll and your safety risk. Ask whether the supplier trains your operators and mechanics.

7. Warranty, parts and technical support

Ask for the warranty in writing. For the CD range, the manufacturer data lists 6 months for the engine and 12 months for structure and systems, subject to the contract terms. Ask where spare parts are stocked, how fast they ship to your country and who answers the phone when the rig is stopped.

Which model for which work

  • CD 100: shallow to medium SPT, urban and restricted-access sites, companies starting a mixed-rig operation.

  • CD 200: a step up in SPT depth and rotary capacity for mixed workloads.

  • CD 400: deeper SPT and long rotary runs, for companies that win larger geotechnical and rock-coring contracts.

Compare real jobs from your last two years with the capacity table before choosing, and keep margin: a rig bought for the average job struggles with the hardest one.

Questions to put in your request for quotation

  • Recommended and maximum depth for SPT and for each core diameter.

  • SPT standard supported, hammer mass and drop height, and whether they can be adjusted.

  • Weight, dimensions and transport options.

  • Warranty terms, parts availability and technical support in your country.

  • Training for operators and delivery time.

Looking for an SPT rig? Tell Diamond Drill about your depths, ground and access and ask for a quote on the multifunction rig that fits. Cost questions are covered in how much does it cost to start a drilling company.

Frequently asked questions

What is an SPT drilling rig?

An SPT drilling rig drives a split-barrel sampler into the soil at the bottom of a borehole with a 63.5 kg or 65 kg hammer falling 750 to 760 mm, and records the blows needed for the last 300 mm. A modern rig automates the hammer drop and can also include a rotary system for rock coring.

What depth can a CD 100, CD 200 and CD 400 reach with SPT?

The manufacturer data gives recommended and maximum SPT depths of 40 to 50 m for the CD 100, 50 to 55 m for the CD 200 and 60 to 65 m for the CD 400. Actual depth depends on ground conditions, tooling and correct operation.

Is an automatic SPT hammer worth it?

It repeats the same drop height every blow, reduces the people needed on the rig and keeps operators away from ropes and pulleys. That makes the results more consistent from crew to crew.

Can the same rig do SPT and rock coring?

Yes, mixed rigs combine an automatic SPT system with a rotary system, so the crew can continue with coring when the SPT reaches refusal.

What warranty comes with the CD range?

The manufacturer data lists 6 months for the engine and 12 months for structure and systems. The final warranty follows the contract terms.

Need equipment for SPT?

Diamond Drill manufactures drilling rigs. Talk to our technical team and find the right solution for your work.

Need equipment for SPT?

Talk to our technical team.

Request a proposal →Our offices