Two boreholes in the same soil can return different N-values simply because the hammer delivered different energy to the sampler. That is why geotechnical practice uses N60, a value standardized to a reference energy. This article explains the idea without heavy formulas.
Where the SPT energy comes from
In the SPT, a hammer falls from a set height and transfers energy to the rods and sampler. The standard fixes the hammer mass and drop height, which defines the theoretical energy of each blow. In practice, part of that energy is lost: rope and cathead friction, drop height errors, loose joints, rod length and how the hammer is coupled.
What hammer efficiency means
Efficiency (or energy ratio, ER) is the share of the theoretical energy that actually reaches the rods, as a percentage. It varies from one system to another. Published studies show that common hammer systems can differ widely, so check the literature and, whenever possible, measure the energy of your own equipment.
What N60 is
N60 is the N-value corrected to a reference efficiency of 60%. If your system delivers more energy than 60%, the measured N tends to be lower than it would be at the reference, and the correction adjusts for that:
- efficiency above 60%: N60 is higher than the measured N;
- efficiency below 60%: N60 is lower than the measured N;
- efficiency equal to 60%: they match.
Other corrections that usually come with it
- Rod length, at shallow depths.
- Borehole diameter and use of a sampler liner.
- Effective stress, when N is used in correlations for sands.
Why this matters if you run drilling jobs
If your client uses published correlations based on N60, the raw N in your report must be interpretable. Equipment with a consistent hammer drop and known energy lowers uncertainty and avoids disputes about the result. See also how automated SPT reduces variability and ASTM D1586 vs. ISO 22476-3.
Diamond Drill compact rigs, the SLP 100E and SLP 160E, use automated SPT to keep the hammer drop constant between tests.
Efficiency values and correction criteria depend on the standard and the project. Always check the current edition.
{{t.k50}}
Diamond Drill manufactures drilling rigs. Talk to our technical team and find the right solution for your work.
