Anyone who runs or commissions SPT borings needs to know what changes in the result when the hammer is manual or automatic. The answer affects how you compare data from different crews and projects.
How a manual hammer works
In the manual system, the crew lifts the hammer with a rope and a pulley and lets it fall freely. The drop height depends on whoever pulls the rope. It can vary from one blow to the next and from one operator to another, and friction in the rope and pulley changes the energy that reaches the rods.
How an automatic hammer works
An automatic system lifts the hammer with a mechanism and releases it at the same height every time, on a regular cycle. The drop no longer depends on the operator, and the interval between blows is more constant.
What changes in practice
Aspect | Manual | Automatic |
|---|---|---|
Drop height | Depends on the operator | Constant |
Repeatability between blows | Lower | Higher |
Energy delivered | Varies with friction and technique | More stable and easier to verify |
Crew effort | High | Lower |
Are the numbers comparable?
This is the most common question. Because the delivered energy can differ, the N-value from one system is not automatically equal to the other. The recommended practice is to record the hammer system used in the report and, if possible, the measured energy. See also N60 and hammer efficiency.
What the client should ask for
- Type of hammer and lifting system.
- Hammer mass and drop height according to the applicable standard.
- Calibration or maintenance records for the equipment.
Read more in Automated SPT: what it is and how it works and see the compact rigs with automated SPT from Diamond Drill.
Always check the requirements of the current standard and your contract.
{{t.k50}}
Diamond Drill manufactures drilling rigs. Talk to our technical team and find the right solution for your work.
