Anyone working with rotary drilling soon hears the codes BQ, NQ, HQ and PQ. They set the size of the hole and of the core, and the choice changes cost, achievable depth and sample quality.
What the codes mean
The letters indicate the bit and core diameter. In increasing order: BQ, NQ, HQ and PQ. The values below are approximate and vary slightly by manufacturer and system (conventional or wireline). Confirm with your supplier's table.
Size | Core diameter (approx.) | Hole diameter (approx.) |
|---|---|---|
BQ | 36 mm | 60 mm |
NQ | 48 mm | 76 mm |
HQ | 63 mm | 96 mm |
PQ | 85 mm | 122 mm |
How the choice affects the project
- Larger size: sturdier core, better recovery in fractured rock and a bigger sample for testing. In return: more weight, more fluid, less depth with the same rig and a higher cost per meter.
- Smaller size: faster, lighter and cheaper, and allows more depth with the same rig. The core is more fragile and may be too small for some tests.
Practical selection rules
- Sound, continuous rock, description only: NQ is often enough.
- Fractured or weathered rock: HQ, with a double or triple tube barrel, helps recovery.
- Lab tests that need a larger specimen: check the test standard and, if needed, go to HQ or PQ.
- Great depth: start larger and reduce when needed, leaving room for casing.
Watch the rig capacity
A rig's rated depth depends on the size. A rig rated for 100 m in NQ will not reach the same figure in HQ. Before buying or renting, check the data sheet by size. Compare the RDL 300, 500 and 700 rotary rigs and the multifunction rigs from Diamond Drill.
Also read RQD: what it is and how to calculate it.
{{t.k50}}
Diamond Drill manufactures drilling rigs. Talk to our technical team and find the right solution for your work.
