Diamond Drill
Blog · Drilling and geotechnics

Rock Core Description: Weathering, Fracturing, Strength and RQD

A rock core is only as useful as its description. A consistent description turns a box of rock into numbers and words an engineer can use in design. Most geotechnical logs cover the same group of features.

Follow the classification system required by the project, such as ISRM suggested methods or a national standard.

What a good description includes

  1. Rock type, with color, grain size and texture.
  2. Weathering grade.
  3. Strength.
  4. Discontinuities: frequency, orientation, aperture, roughness and infill.
  5. Recovery and RQD.

Weathering

Weathering is usually described on a graded scale from fresh rock, through slightly, moderately and highly weathered rock, to completely weathered rock and residual soil. The ISRM scheme uses six grades. Describe the color change, the loss of rock fabric and whether the rock can be broken by hand.

Strength

Field estimates of strength are made with simple tools:

TestIndicative result
FingernailVery weak rock or stiff soil
KnifeWeak rock that can be scratched or peeled
Hammer blowMedium to strong rock, by the effect of the blow
Several hammer blowsVery strong rock

The ISRM scale runs from extremely weak (R0) to extremely strong (R6). Where numbers are needed, confirm with uniaxial compressive or point load tests.

Fracturing

Count and describe the natural fractures, and discard breaks caused by drilling or handling. Report fracture frequency, such as number of fractures per meter, and the spacing of the main sets. Describe the aperture, roughness and infill of the main discontinuities, since they control the behavior of the rock mass.

Recovery and RQD

Always report core recovery for each run. Calculate RQD and state how mechanical breaks were treated. See RQD: what it is and how to calculate it.

Photographs

Photograph the core boxes wet and dry, with a scale and a label, and keep them with the log.

Good habits

  • Describe in the same order every time.
  • Use the same terms across the whole project.
  • Separate observation from interpretation.

ISRM strength classes at a glance

ClassDescriptionApprox. uniaxial strength (MPa)
R0Extremely weak0.25 to 1
R1Very weak1 to 5
R2Weak5 to 25
R3Medium strong25 to 50
R4Strong50 to 100
R5Very strong100 to 250
R6Extremely strongMore than 250

Use these ranges as an orientation and confirm them with the edition of the ISRM suggested method or the national standard your project requires.

RQD in one line

RQD is the sum of the sound core pieces 100 mm or longer, divided by the length of the run, in percent. Count only natural fractures and state how mechanical breaks were treated. The full method is in RQD: what it is and how to calculate it.

Example of a log entry

"Granite, grey, medium grained, slightly weathered (grade II), strong (R4). Fractures 6 per meter, mostly planar and rough, iron-stained, tight. Recovery 92%, RQD 68%."

The example is illustrative. Adapt the wording to the classification system of the project, and keep the same order and terms in every run.

Frequently asked questions

What does a rock core description include?

Rock type, weathering grade, field strength, discontinuities (frequency, orientation, aperture, roughness and infill), core recovery and RQD, plus photographs of the boxes.

How many weathering grades does ISRM use?

The ISRM scheme uses six grades, from fresh rock to residual soil, passing through slightly, moderately, highly and completely weathered rock.

How do I estimate rock strength in the field?

With simple tools: fingernail, knife and hammer blows, on the ISRM scale from R0 to R6. Where numbers are needed, confirm with uniaxial compressive or point load tests.

Should I count drilling breaks in RQD and fracture frequency?

No. Count natural discontinuities only and discard breaks caused by drilling or handling, stating the rule you used.

For drilling companies

A good description starts with good core. See barrel selection and the Diamond Drill rotary drill rigs.

Need equipment for SPT?

Diamond Drill manufactures drilling rigs. Talk to our technical team and find the right solution for your work.

Need equipment for SPT?

Talk to our technical team.

Request a proposal →Our offices