RQD (Rock Quality Designation) is one of the numbers most often requested in a rotary drilling report. It condenses the degree of fracturing of the rock into a single value, taken from the core. It is simple to calculate and easy to get wrong.
What RQD is
Proposed by Deere in the 1960s, RQD is the percentage of a drill run that is made up of sound core pieces 10 cm or longer. The more fractured the rock, the lower the RQD.
How to calculate it
- Define the interval: normally one core run, with the drilled length.
- Add the lengths of intact core pieces of 10 cm or more, measured along the core axis.
- Divide that sum by the run length.
- Multiply by 100.
Example: in a 1.50 m run, the pieces of 10 cm or more add up to 1.05 m. RQD = 1.05 / 1.50 × 100 = 70%.
Quality classes
RQD | Rock quality |
|---|---|
0 to 25% | Very poor |
25 to 50% | Poor |
50 to 75% | Fair |
75 to 90% | Good |
90 to 100% | Excellent |
Common mistakes
- Counting breaks caused by drilling or handling. Fresh mechanical breaks are not natural fractures: fit them together and measure as one piece.
- Measuring the curve of inclined pieces instead of the core axis.
- Using very small core. The original proposal recommends a minimum size around NX (about 54 mm).
- Calculating with core loss without recording the recovery.
Limitations
RQD does not consider aperture, infill or orientation of the fractures. It is therefore used together with a description of the discontinuities and the core recovery. For rock foundations and tunnels, it often feeds rock mass classification systems.
The role of the equipment
A double or triple tube barrel, controlled feed and a suitable bit preserve the core and give a more reliable RQD. See the Diamond Drill rotary rigs and multifunction rigs.
{{t.k50}}
Diamond Drill manufactures drilling rigs. Talk to our technical team and find the right solution for your work.
