Diamond Drill
Blog · Drilling and geotechnics

Track, Truck or Trailer Mounted Drill Rig: Which to Choose

The mounting platform affects where the rig can work, how fast it moves between holes and how it gets to the site. Choosing the right one often matters as much as the drilling capacity.

Track (crawler) mounted

Strengths

  • Moves on soft, uneven or steep ground.
  • Low ground pressure, which helps on wet or fragile surfaces.
  • Moves between holes under its own power, without a separate vehicle.

Limits

  • Needs a trailer or truck for road transport.
  • Slower travel on site than a truck.

Truck mounted

Strengths

  • Fast road travel, and can be at the site without a transport vehicle.
  • Good for projects with many separated sites.
  • Carries tools, rods and water on the same vehicle.

Limits

  • Needs reasonable access and firm ground.
  • Larger footprint, which limits use in restricted sites.

Trailer mounted

Strengths

  • Lower investment and low operating cost.
  • Light enough for towing by a pickup or a small truck, in many cases.
  • Suits small jobs and urban sites.

Limits

  • Must be unhitched, leveled and stabilized at each position.
  • Less suited to difficult terrain.

Comparison

FactorTrackTruckTrailer
Difficult terrainExcellentLimitedLimited
Road travelNeeds transportExcellentGood
Setup timeShortShortLonger
FootprintCompactLargeCompact
InvestmentMedium to highHighLower

How to choose

  1. Where do you work most? Urban sites, rural land, slopes, soft ground, long distances.
  2. How many holes per site? Many holes per site favor a platform that moves easily.
  3. What access do you have? Narrow passages, basements and gates limit size.
  4. How will it be transported? Consider the cost of a separate transport vehicle.

Related reading

For urban and restricted work, see compact drill rigs for urban site investigation.

Match the platform to the work

Typical workPlatform that usually fitsWhy
Urban sites, basements, narrow gatesCompact track-mountedSmall footprint and moves under its own power
Soft, wet or sloping groundTrack-mountedLow ground pressure and traction
Many separate sites over long distancesTruck-mountedFast road travel and tools on the same vehicle
Small jobs on a tight budgetTrailer-mountedLower investment and operating cost

Do not forget the transport cost

A track rig that needs a trailer or a truck adds a vehicle, a driver and loading time to every mobilization. A truck rig removes that cost but needs access and firm ground. Add the cost of transport to the comparison, not only the price of the machine.

What the Diamond Drill CD range offers

The CD 100, CD 200 and CD 400 mixed rigs travel on self-propelled rubber tracks with hydraulic levelling, and can be transported on trailers, vans or small trucks according to the manufacturer data. That combination suits sites where a truck cannot enter and where the rig must move between holes without a separate vehicle. Compare the models on the CD 100, CD 200 and CD 400 pages, and read how to choose a geotechnical SPT rig.

Questions to ask the supplier

  • What is the weight and the smallest passage the rig can use?

  • How is it transported, and by what type of vehicle?

  • How long does it take to set up and level at each hole?

  • What ground pressure does it apply on soft surfaces?

Frequently asked questions

Is a track-mounted drill rig better than a truck-mounted one?

It depends on the work. Tracks win on soft, uneven or restricted ground and for moving between holes. A truck wins on road travel and for projects spread over many sites.

Can a trailer-mounted rig work on soft ground?

It is less suited to it. A trailer rig must be unhitched, leveled and stabilized at each position, and it has no drive of its own.

Do track-mounted rigs need a truck to travel on roads?

Usually yes. They move on site under their own power but are carried by a trailer or truck between sites.

Which platform has the lowest cost to start?

A trailer-mounted rig normally has the lowest investment, but include transport, setup time and the kind of ground you work on before deciding.

For drilling companies

Diamond Drill builds compact, multifunction and rotary rigs. Compare them and talk to the team about the platform that fits your work.

Need equipment for SPT?

Diamond Drill manufactures drilling rigs. Talk to our technical team and find the right solution for your work.

Need equipment for SPT?

Talk to our technical team.

Request a proposal →Our offices