SPT-T adds a second piece of information to the traditional test: the torque needed to turn the sampler once it is driven into the soil. It is a simple measurement that can help separate soils that N alone does not distinguish well.
What SPT-T is
After driving the sampler to obtain N, the crew applies torque to the rods with a torque wrench and records the peak value that breaks the bond between soil and sampler, then the residual value. The idea is to measure the lateral friction mobilized in the soil around the sampler.
How the measurement is made
- Drive the sampler and record N as in the conventional test.
- Keep the sampler in place, without pulling it out of the soil.
- Fit the torque wrench to the top of the rods.
- Turn continuously and record the peak torque.
- Keep turning and record the residual torque.
What the T/N ratio is for
Comparing torque to N gives a T/N ratio. In the Brazilian literature, higher ratios are usually associated with structured or cemented soils, such as some lateritic and residual soils, while lower ratios appear in uncemented sedimentary soils. This helps identify soil type and interpret density or consistency. As with any empirical correlation, use it with caution and local experience.
When SPT-T is worth adding
- Tropical soils with possible structure or cementation.
- Foundation projects where lateral friction matters, such as piles.
- When you want more information without changing the boring method.
What it requires from the equipment
The test works best with straight rods, good alignment and a calibrated torque wrench or rotation system. Bent or loosely coupled rods distort the reading. See also how to read an SPT boring log and Diamond Drill compact and multifunction rigs.
Check how SPT-T is treated in the applicable standard and what records your project requires.
{{t.k50}}
Diamond Drill manufactures drilling rigs. Talk to our technical team and find the right solution for your work.
